Software updates on Fronius SnapINverters can be applied to fix any software related bugs or to fix any software related state codes. Fronius inverters, which are setup for online monitoring have the remote software update feature enabled and can be remotely updated through Fronius Solar.web. For systems which are not setup for online monitoring, SnapInverter updates can be applied via the inverter’s USB port and the GEN24 updates can be applied via the inverter´s web interface.
Easy online update in Fronius Solar.web:
In Solar.web under "Settings - Components" you can always download the latest software for your GEN24 Plus.
Offline update:
1. Download the update file here
2. Connect to the user interface of the inverter:
3. Then select the category "Update" in the menu item "System"
4. Select the file
5. Perform the update
Easy online update in Fronius Solar.web:
In Solar.web under "Settings - Components" you can always download the latest software for the Fronius Tauro.
Offline update:
1. Download the update file here
2. Connect to the user interface of the inverter:
3. Then select the category "Update" in the menu item "System"
4. Select the file
5. Perform the update
The 'Fronius USB Update/Galvo/Primo/Symo/Eco' provides the latest software for Fronius Galvo, Fronius Primo, Fronius Symo and Fronius Eco inverters.
The 'Fronius Solar.update/Energy Package' provides the latest software for the Fronius Energy Package.
The "Fronius Solar.update/Datamanager" package contains the latest software for the Fronius Datamanager. You can update the Datamanager online via the SolarWeb portal if it has been set up for online monitoring.
Instructions for an offline Datamanager update:
The package 'Fronius Solar.update/Agilo' contains the latest software for Fronius Agilo inverters.
It is recommended to reload the particular country setup in your inverter (e.g. Setup DE, Setup ES, etc.), so that all changes have been applied in the memory of the device. In case of any questions about reloading the country setup in the service menu, please get in contact with your national TechSupport hotline.
Please consider that - with a reload of the country setup - all settings regarding grid parameters that have already been executed will be overwritten (by default limits as required in the national standards). You have to adjust the parameters manually via the inverter display again, if necessary.
The package „Fronius update/Agilo“ contains the latest software for inverters of the Fronius Agilo series. It can be executed via Fronius Solar.Service software.
The package 'Fronius Solar.update/IG' contains the latest software for all inverters of the Fronius IG series.Please note that this update is NOT applicable for US-devices!
The package 'Fronius Solar.update/IG TL' contains the latest software for all inverters of the Fronius IG TL series. It can be executed with the Fronius Update Package or Fronius Datalogger directly via PC. The package 'Fronius USB update/IG TL' contains the latest software for all inverters of the Fronius IG TL series. It can be executed via USB Stick.
The package 'Fronius Solar.update/IG Plus/CL' contains the latest software for all inverters of the Fronius IG Plus and Fronius CL series.
Please note that this update is NOT applicable for US-devices!
The package 'Fronius Solar.update/String Control 100/12' contains the latest software for the Fronius String Control 100/12.
The package 'Fronius Solar.update/String Control 250/25' contains the latest software for the Fronius String Control 250/25.
The package 'Fronius Datalogger Update 5.01.22' contains the latest software for every Fronius Datalogger (easy/pro).
The Fronius Datalogger easy/pro is equipped with a serial interface as well as a modem interface.
The package 'Fronius Solar.update/Datalogger2' contains the latest software for every Fronius Datalogger2 (easy/pro).
The Fronius Datalogger2 easy/pro is equipped a serial interface, a modem interface as well as a USB interface.
With the update for the Fronius Datalogger Web you implement the latest software version to your DATCOM-allrounder.
With this update, both the Fronius Personal Display DL and the Fronius Personal Display Card will be updated to the latest firmware version.
The Fronius Datalogger Finder finds all Datalogger/Datamanagers in a network and connects to the local web interface.
The Fronius Solar.Access software was used to monitor and parameterise the older generation of data loggers or inverters. The software is no longer maintained and is no longer compatible with new PC operating systems. All new Fronius products are configured via web browser and visualised in the Fronius Solar.web portal.
The Fronius Solar.Service software was used in the older generations of data loggers or inverters as an analysis tool and for parameterisation. This software is currently only required for configuring a Fronius Sensor Card/Box or a Fronius String Box.
This package contains the Microsoft Windows USB Driver (32/64 Bit version) for Fronius Datalogger easy/pro.